Vax V-041HS Service Manual download pdf (Page 109)

Table 3–9 (Cont.): Console Commands

Command Function

SET MEMORY Designates the method of interleaving the memory mod-

ules; supersedes the console program’s default interleav-

ing.

SET TERMINAL Sets console terminal characteristics in the EEPROM.

SHOW ALL Displays the current value of parameters set.

SHOW BOOT Displays all boot commands and nicknames that have been

saved using SET CPU.

SHOW CONFIGURATION Displays the hardware device type and revision level for

each XMI and VAXBI node and indicates self-test sta-

tus.

SHOW CPU Displays the /ENABLED and /PRIMARY values for each node.

SHOW ETHERNET Locates all Ethernet adapters on the system and dis-

plays their addresses.

SHOW MEMORY Displays the memory lines from the system self-test, show-

ing interleave and memory size.

SHOW TERMINAL Displays the baud rate and terminal characteristics function-

ing on the console terminal.

START Begins execution of an instruction at the address speci-

ﬁed in the command string.

STOP Halts the speciﬁed node.

TEST Passes control to the self-test diagnostics; /RBD qualiﬁer in-

vokes ROM-based diagnostics.

UPDATE Copies contents of the EEPROM on the processor execut-

ing the command to the EEPROM of the processor speci-

ﬁed in the command string.

Z Logically connects the console terminal to another proces-

sor on the <REFERENCE>(XMI) bus or to a VAXBI node.

! Introduces a comment.

<REFERENCE>(xyp) Scalar Processor 3–39

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 298 299

No comments

Vax V-041HS Service Manual Page 109