2. Parts Overview
2. Lift out the full dust bag Fig.6/2 3. The pre-motor filter is found in the centre of
the dirt container. Rotate the filter retaining
disc anti-clockwise to gain access to the
filter (Fig.6/4).
3. Dispose the full dust bag and insert a new
dust bag into the vacuum cleaner. Align the
front of the dust bag with the air entrance.
NOTE: The seal ring around the dust bag
opening should cover the air entrance
connector inside the housing.
Pre-motor Filter (Model VCC-05 only)
1. Turn off the vacuum cleaner and unplug it
from the electrical outlet.
2. Unclip the retainer clip on the top of the
vacuum cleaner and lift up to gain access
to the dirt container department. (Fig.6/3)
4. The pre-motor filter can be lifted out.
(Fig.6/5)
NOTE: Vax recommends replacing the pre-
motor filter when it becomes discoloured.
5. Replace with a new filter inside and turn the
retaining disc clockwise to secure. (Fig.6/6)
Comments to this Manuals