Vax V-028U Instruction Manual download pdf (Page 5)

Tool Storage/Preparing the Carpet

Fig.3/8

Fig.3/9

Fig.3/10

Fig.3/11

Fig.3/12

Place Upholstery/Stair hose adaptor, Upholstery/Stair

hose, and the Upholstery/Stair attachment into their

storing locations.

Slide the adaptor end of hose into the left clip

on tool caddy.

pholstery/

tair hose

Upholstery/Stair

hose attachment

Upholstery/Stair

ose adaptor

Left clip On

Tool caddy

Adaptor end

of hose

Hose

clips

No 2

Run hose from the tool caddy to the upper hose

wrap and press into hose clip No.1 (Fig.3/10). Continue

wrapping hose clockwise, aligning hose into groove on

the bottom hose clip (Fig.3/11). Wrap hose back to the

upper hose wrap and press into hose clip No.2

(Fig.3/10). Slide upholstery tool attachment handle into

the right clip of the tool caddy (Fig.3/12).

4. Preparing the Carpet

IMPORTANT: DO NOT USE THE CARPET WASHER

AS A DRY VACUUM.

1. Vacuum carpet thoroughly. Use a vacuum cleaner

with a revolving brushbar for best results.

2. Remove as much furniture from the room as

possible. If unable to remove the furniture, place

plastic or foil under and around the legs until the

carpet has dried completely.

HELPFUL HINTS FOR CLEANING CARPET:

1. Only use Vax AAA Carpet Cleaner with this carpet

washer.

2. Do not oversaturate carpet with cleaning solution

while using the carpet washer.

3. For heavily soiled areas, additional applications may

be necessary.

4. Allow plenty of time to dry carpet thoroughly.

5. Wipe cleaning solution from woodwork and wood

to prevent any damage.

6. Try not to walk on carpet until it is completely dry.

7. After carpet is thoroughly dry, vacuum the carpet

using a vacuum cleaner with a revolving brushbar.

8. Before cleaning, determine where to start and end,

making sure not to walk over previously cleaned

areas.

CHECK FOR COLOUR FASTNESS:

Before cleaning carpet, test for colour fastness.

Dampen a white cloth with solution. Test a small area

in a closet. Gently rub the cloth over the area. Check

each colour for colour bleeding. If the cloth remains

clean, it should be safe to clean the carpet.

AFTER CLEANING:

•

Allow carpet to dry completely

. T

ry not to walk on the

carpet until it is dry.

•

If it is necessary to walk on the carpet, place white

towels on the areas to be walked on.

• If the carpet is not dry and the furniture must be

placed back in the room, use plastic or foil under the

furniture to prevent staining the carpet.

•

Thor

oughly clean the dirty water tank with warm

(max 40

C) tap water

Bottom

hose clip

No 1

Upholstery

tool

attachment

handle

Right clip

on Tool

caddy

Tool Storage

(Model: V-028/V-028PT/V-028PET only)

Vax V-028 Range.qxd 27/4/07 13:26 Page 5

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Vax V-028U Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Vacuum cleaners Vax V-028U